Razor Wheelchair 13010800 User Guide

SCOOTER  
Owner’s Manual  
Read and understand this entire manual before  
allowing child to use this product!  
For assistance contact Razor. DO NOT RETURN TO STORE.  
NOTE: Manual illustrations are for demonstration purposes only. Illustrations  
may not reflect exact appearance of actual product. Specifications subject to  
change without notice.  
Item Number:  
Black  
Blue  
Purple  
13010800  
13010840  
13010850  
Version: 2_09_10  
 
BEFORE yOU BEgIN  
Remove contents from box. Inspect the contents of the box for scratches in the paint and/or dents that may have  
occurred during shipping. Because your scooter was assembled and packed at the factory, there should not be any  
problems, even if the box has a few scars or dents.  
WaRNINg: DO  
NOT USE NON-RAZOR  
PRODUCTS WITH YOUR  
SCOOTER.  
Razor scooters have been built to  
certain Razor design specifications.  
The original equipment supplied  
at the time of sale was selected  
on the basis of its compatibility  
with the frame, fork and all other  
parts. Certain aftermarket products  
may or may not be compatible.  
Use of any non-Razor parts and/  
or modifications will void the  
warranty.  
Grip  
T-tube  
Handlebar  
Steering tube quick-release  
Steering tube/steering column  
Chalk mechanism  
Collar clamp  
Rear fender/brake  
Joint lever/pivoting mechanism  
Deck  
Front fork  
Wheels  
q Required Tools  
5mm  
Allen wrench  
(Not Included)  
Chalk  
(Included)  
Need Help? Visit www.razor.com for replacement parts, product support and a list of authorized  
service centers or call toll-free at 866-467-2967 Monday - Friday 8:00 AM - 5:00 PM Pacific Time.  
2
 
SET UP aND USagE INSTRUCTIONS  
q Unfolding the scooter for first time use.  
WaRNINg: Failure to  
properly engage the spring-loaded  
buttons may cause the handlebars  
to dislodge while riding and may  
cause you to lose control and  
fall. When correctly engaged the  
handlebars will not rotate nor will  
they move sideways. Note that  
when properly engaged, the spring-  
loaded buttons are clearly visible in  
the holes on the T-bar.  
1 Insert and secure the left and  
right handlebars by pressing the  
spring-loaded buttons and  
2 Make certain BOTH handlebars  
3 To release the folding  
are properly locked onto the T-bar.  
mechanism, put one foot on the  
deck plate and push joint release  
lever down. Raise handlebars up  
until securely locked in the upright  
position.  
inserting them into the T-bar.  
WaRNINg: Keep  
your fingers clear of the pivoting  
mechanism when folding or  
unfolding the scooter. Make sure  
others are standing clear.  
WaRNINg: Failure to  
properly secure the quick-release  
lever may cause the T-bar to  
telescope up or down while riding  
which may cause you to lose  
control and fall.  
Note: The joint lever is spring-  
loaded and will automatically lock  
in the upright position when fully  
upright.  
4 To adjust the height of the handlebars, open the quick-release lever and  
slide the T-bar to the desired position and resecure the quick release lever to  
lock into place. If the T-bar is raised to the maximum height, depress the push  
button located directly below the quick release lever to lower the T-bar.  
Note: The tension of the quick-  
release lever can be adjusted by  
tightening or loosening the Allen  
bolt. Be careful not to over-tighten.  
You should always be able to open  
and close the quick-release lever  
by hand and the T-bar should slide  
freely with the quick-release open.  
3
 
SET UP aND USagE INSTRUCTIONS  
q Installing your chalk  
WaRNINg: Keep fingers  
clear of chalk bar hinge and fender  
brake.  
NOTE: Chalk is non-toxic.  
Conforms to ASTM4236.  
Chalk washes off with water for  
easy clean-up.  
1 Insert the tapered end of the  
2 Twist chalk clockwise 1/4 turn  
until chalk is set securely in the  
spring. Periodically turn chalk as  
needed.  
chalk into the spring.  
WaRNINg: Applying too  
much pressure on the chalk bar may  
cause loss of control.  
q How to Ride  
Place one foot on the baseboard, push forward with the other foot. Steer. For enhanced cornering, lean slightly into the  
direction of the turn. For controlled stops, apply the brake by stepping on the rear fender/brake. Razor recommends that  
you practice applying the brake at various speeds and in an open area free from obstructions before riding your Razor  
around others.  
NOTE: Using any other part of  
the foot or full foot may activate the  
brake and prevent the chalk action.  
NOTE: Chalk marks and  
chalk life will vary based  
on the amount of pressure  
applied to the chalk bar and  
the smoothness of the riding  
surface.  
q Using the Chalk Bar  
When riding, place ball of foot on the chalk bar and apply pressure until the chalking mechanism clicks into place. Only  
use enough pressure to cause chalk to make a mark. To stop chalking, place ball of foot on chalk bar and apply pressure  
until it clicks to the desired position.  
1Up Position - No chalking  
2 Down Position - Chalking  
Need Help? Visit www.razor.com for replacement parts, product support and a list of authorized  
service centers or call toll-free at 866-467-2967 Monday - Friday 8:00 AM - 5:00 PM Pacific Time.  
4
 
CHECk BEFORE RIDINg  
q Collar Clamp  
Using a 5mm Allen key, check that the collar clamp bolt is tightened securely. This part is tightened and quality  
inspected at the factory but there is a slight chance that the effects of shipping or handling may have caused this bolt  
to become loose.  
q Wheels and Bearings  
WaRNINg: Wheelies  
will break the chalk bar. Other  
stunt-type riding reduces your  
ability to maneuver and control  
the scooter. Take the necessary  
precautions, such as wearing  
appropriate protective gear and  
practice in a area safe for stunt  
riding and free from obstructions.  
Under normal circumstances and conditions, Razor wheels and bearings are maintenance free. Nonetheless, it is  
the responsibility of the owner or guardian to periodically inspect the wheels for wear and tear, the axle for proper  
tightness, and bearings for side-to-side play and loose parts. When a wheel or wheel bearing develops play, this is an  
indication of excess wear and replacement is necessary. Replace immediately with only genuine Razor wheels. Wheels  
other than genuine Razor wheels may not be compatible with your Razor scooter. The use of anything other than genu-  
ine Razor replacement parts may affect your safety and will void your warranty.  
NOTE: Worn wheels, bearings  
and chalk cartridges are considered  
normal wear-and-tear and are not  
covered by the Razor Warranty.  
q Cleaning your Scooter  
Wipe with a damp cloth to remove dirt and dust.  
Do not use industrial cleaners or solvents as they may damage the surfaces. Do not use alcohol, alcohol-based or am-  
monia-based cleaners as they may damage or dissolve the plastic components or soften the decals or decal adhesive.  
5
 
SCOOTER PaRTS LIST  
Keep your scooter running for years with genuine Razor parts. Visit our web site or e-mail us for more information on spare part availability.  
(Specifications subject to change without notice.)  
1.  
2.  
3.  
4.  
5.  
6.  
7.  
8.  
9.  
Foam Grips  
Handlebar  
T-Bar  
12. 98mm Wheels  
13. Coupling Axle Screw  
14. Deck Insert (front)  
15. Reinforce Plate  
16. Joint Release Lever  
17. Folding Base  
Quick-Relese Lever  
Extension Tube  
Collar Clamp  
Headset  
18. Folding Protector  
19. Fender/Brake  
Head Tube  
Fork  
20. Chalk Bar  
10. Fork Protector  
21. Deck Insert (rear)  
11. Axle Bolt (front/rear)  
1
2
3
4
5
16  
17  
18  
6
7
8
20  
19  
21  
9
10  
23  
11  
15  
12  
11  
12  
14  
13  
13  
Need Help? Visit www.razor.com for replacement parts, product support and a list of authorized  
service centers or call toll-free at 866-467-2967 Monday - Friday 8:00 AM - 5:00 PM Pacific Time.  
6
 
SaFETy REMINDERS  
PRE-RIDE CHECkLIST  
Loose Parts  
Be Careful!  
Check and secure all fasteners before every ride. Make sure the  
collar clamp, quick release lever, and handlebar spring buttons are  
locked properly in place before riding.  
You will see people on TV and maybe even people you know doing  
tricks and stunts. These are people who have been practicing on  
scooters for a very long time. Don’t try something until you are  
ready. Avoid steep inclines and don’t ride too fast — you can lose  
control and fall. Skateboard parks are not designed for scooters.  
Never ride in traffic or on the street and watch your surroundings  
for pedestrians, bikers, boarders and skaters.  
q
q
Replacement Parts  
Replace worn or broken parts immediately. Call 1-866-GO-RAZOR  
for parts.  
q
q
Maintain a hold on the handlebars at all times.  
Safety gear  
Always wear proper protective equipment such as an approved  
safety helmet, elbow pads and kneepads. Always wear shoes  
(lace-up with rubber soles), never ride barefooted or in sandals,  
and keep shoelaces tied and out of the way of the wheels.  
DO NOT RETURN TO STORE  
Failure to follow these instructions may damage  
your product and void your warranty.  
WaRRaNTy  
Razor Limited Warranty  
Razor does not offer an extended warranty. If you have purchased an  
extended warranty, it must be honored by the store at which it was  
purchased.  
The manufacturer warranties this product to be free of manufacturing defects  
for a period of 6 months from date of purchase. This Limited Warranty does  
not cover normal wear and tear, or any damage, failure or loss caused by  
improper assembly, maintenance, or storage.  
For your records, save your original sales receipt with this manual.  
__________________________________________  
This Limited Warranty will be void if the product is ever  
• used in a manner other than for recreation;  
• modified in any way;  
Item Number:  
Black  
Blue  
Purple  
13010800  
13010840  
13010850  
• rented.  
The manufacturer is not liable for incidental or consequential loss or damage  
due directly or indirectly to the use of this product.  
Need Help? Visit www.razor.com for replacement parts, product support and a list of authorized  
service centers or call toll-free at 866-467-2967 Monday - Friday 8:00 AM - 5:00 PM Pacific Time.  
Printed in China for:  
Razor USA LLC  
PO Box 3610  
Cerritos, CA 90703  
Copyright © 2003-2010 Razor USA, LLC. All rights reserved. RAZOR and the Razor Logo  
Design are among the registered trademarks of Razor USA LLC in the United States and/or  
select foreign countries. Graffitil is a trademark of Razor USA LLC.  
09/2010  
7
 

Radio Shack Switch 26 199 User Guide
RedMax Pole Saw PSZ2401 CA User Guide
Riccar Sewing Machine RL634DE User Guide
Roberts Radio Radio R9939 User Guide
Runco Home Theater Screen SP 42 User Guide
Samsung Blu ray Player BD D7000 ZA User Guide
Samsung Tablet GTP5110ZWMTTT User Guide
Sanyo DVR DSR 2016 User Guide
Seagate Computer Drive STAC2000106 User Guide
Senco Nail Gun Frame Pro 0961 User Guide