Renesas Network Card M3T FLX 144NSE User Guide

M3T-FLX-144NSE  
Converter Board for Connecting 160-core Flexible Board FLX160 to 144-pin 0.4-mm-pitch TQFP  
User’s Manual  
Keep safety first in your circuit designs!  
z Renesas Technology Corporation and Renesas Solutions Corporation put the maximum effort into making semiconductor products  
better and more reliable, but there is always the possibility that trouble may occur with them. Trouble with semiconductors may lead to  
personal injury, fire or property damage. Remember to give due consideration to safety when making your circuit designs, with  
appropriate measures such as (i) placement of substitutive, auxiliary circuits, (ii) use of nonflammable material or (iii) prevention  
against any malfunction or mishap.  
Notes regarding these materials  
z These materials are intended as a reference to assist our customers in the selection of the Renesas Technology product best suited  
to the customer's application; they do not convey any license under any intellectual property rights, or any other rights, belonging to  
Renesas Technology Corporation, Renesas Solutions Corporation or a third party.  
z Renesas Technology Corporation and Renesas Solutions Corporation assume no responsibility for any damage, or infringement of  
any third-party's rights, originating in the use of any product data, diagrams, charts, programs, algorithms, or circuit application  
examples contained in these materials.  
z All information contained in these materials, including product data, diagrams, charts, programs and algorithms represents information  
on products at the time of publication of these materials, and are subject to change by Renesas Technology Corporation and  
Renesas Solutions Corporation without notice due to product improvements or other reasons. It is therefore recommended that  
customers contact Renesas Technology Corporation, Renesas Solutions Corporation or an authorized Renesas Technology product  
distributor for the latest product information before purchasing a product listed herein. The information described here may contain  
technical inaccuracies or typographical errors. Renesas Technology Corporation and Renesas Solutions Corporation assume no  
responsibility for any damage, liability, or other loss rising from these inaccuracies or errors. Please also pay attention to information  
published by Renesas Technology Corporation and Renesas Solutions Corporation by various means, including the Renesas home  
page (http://www.renesas.com).  
z When using any or all of the information contained in these materials, including product data, diagrams, charts, programs, and  
algorithms, please be sure to evaluate all information as a total system before making a final decision on the applicability of the  
information and products. Renesas Technology Corporation and Renesas Solutions Corporation assume no responsibility for any  
damage, liability or other loss resulting from the information contained herein.  
z Renesas Technology semiconductors are not designed or manufactured for use in a device or system that is used under  
circumstances in which human life is potentially at stake. Please contact Renesas Technology Corporation, Renesas Solutions  
Corporation or an authorized Renesas Technology product distributor when considering the use of a product contained herein for any  
specific purposes, such as apparatus or systems for transportation, vehicular, medical, aerospace, nuclear, or undersea repeater use.  
z The prior written approval of Renesas Technology Corporation and Renesas Solutions Corporation is necessary to reprint or  
reproduce in whole or in part these materials.  
z If these products or technologies are subject to the Japanese export control restrictions, they must be exported under a license from  
the Japanese government and cannot be imported into a country other than the approved destination. Any diversion or reexport  
contrary to the export control laws and regulations of Japan and/or the country of destination is prohibited.  
z Please contact Renesas Technology Corporation or Renesas Solutions Corporation for further details on these materials or the  
products contained therein.  
Precautions to be taken when using this product  
z This product is a development supporting unit for use in your program development and evaluation stages. In mass-producing your  
program you have finished developing, be sure to make a judgment on your own risk that it can be put to practical use by performing  
integration test, evaluation, or some experiment else.  
z In no event shall Renesas Solutions Corporation be liable for any consequence arising from the use of this product.  
z Renesas Solutions Corporation strives to renovate or provide a workaround for product malfunction at some charge or without charge.  
However, this does not necessarily mean that Renesas Solutions Corporation guarantees the renovation or the provision under any  
circumstances.  
z This product has been developed by assuming its use for program development and evaluation in laboratories. Therefore, it does not  
fall under the application of Electrical Appliance and Material Safety Law and protection against electromagnetic interference when  
used in Japan.  
If the requirements shown in the "CAUTION" sentences are ignored,  
the equipment may cause personal injury or damage to the products.  
CAUTION  
Renesas Tools Homepage http://www.renesas.com/en/tools  
Rev.1.00  
October 1, 2003  
(1/4)  
REJ10J0227-0100Z  
 
5. Connection Procedure (See Figure 3)  
The procedure for connecting the M3T-FLX-144NSE is shown  
below.  
Probe of emulation pod  
(1) Mount the NQPACK144SE on the target board.  
(2) Attach the YQPACK144SE on the NQPACK144SE.  
(3) Secure the four corners of the YQPACK144SE with the  
YQ-GUIDE's.  
(4)  
Do not use the screws included with the  
YQPACK144SE for fixing the YQPACK144SE.  
The screwdriver included with the NQPACK144SE is  
used for fixing the HQPACK144SE. Do not use if for  
fixing the YQ-GUIDE's.  
M3T-FLX-144NSE  
(5)  
Be sure to use a  
slotted screwdriver.  
YQ-GUIDE (x4)  
YQPACK144SE  
(4) Connect the probe of the emulation pod to the  
M3T-FLX-144NSE.  
(3)  
(5) Attach the M3T-FLX-144NSE on the YQPACK144SE.  
(2)  
(1)  
NQPACK144SE  
144-pin 0.4-mm-pitch  
(144PFB-A) foot pattern  
: No. 1 pin  
Be sure to align the pins.  
Figure 3 Connection procedure of the M3T-FLX-144NSE  
6. External Dimensions and a Sample Foot Pattern  
55.0  
21.8  
0.225  
0.4  
15.1  
19.1  
Unit: mm  
Figure 4 External dimensions and a sample foot pattern of the M3T-FLX-144NSE  
(3/4)  
 
7. Precautions  
CAUTION  
Caution to Be Taken for This Product:  
z When connecting the YQPACK144SE, be sure to use the included YQ-GUIDE's.  
z Do not use the screws included with the YQPACK144SE to fix it.  
IMPORTANT  
Notes on This Product:  
z We cannot accept any request for repair.  
z For purchasing the NQPACK144SE, YQPACK144SE and HQPACK144SE, contact the following:  
Daimaru Kogyo Ltd.  
Tokyo Eletech Corporation  
z For inquiries about the product or the contents of this manual, contact your local distributor.  
Renesas Tools Homepage http://www.renesas.com/en/tools  
8. Correspondence of Connectors CN1 and CN2  
Table 2 Correspondence of the Connectors  
CN1  
1a  
2a  
IC1  
GND  
17  
CN1  
1b  
2b  
IC1  
18  
16  
CN2  
1a  
2a  
IC1  
GND  
20  
CN2  
1b  
2b  
IC1  
19  
21  
3a  
15  
3b  
14  
3a  
22  
3b  
23  
4a  
13  
4b  
12  
4a  
24  
4b  
25  
5a  
11  
5b  
10  
5a  
26  
5b  
27  
6a  
9
6b  
8
6a  
28  
6b  
29  
7a  
7
7b  
6
7a  
30  
7b  
31  
8a  
5
8b  
4
8a  
32  
8b  
33  
9a  
3
9b  
2
9a  
34  
9b  
35  
10a  
11a  
12a  
13a  
14a  
15a  
16a  
17a  
18a  
19a  
20a  
21a  
22a  
23a  
24a  
25a  
26a  
27a  
28a  
29a  
30a  
31a  
32a  
33a  
34a  
35a  
36a  
37a  
38a  
39a  
40a  
1
10b  
11b  
12b  
13b  
14b  
15b  
16b  
17b  
18b  
19b  
20b  
21b  
22b  
23b  
24b  
25b  
26b  
27b  
28b  
29b  
30b  
31b  
32b  
33b  
34b  
35b  
36b  
37b  
38b  
39b  
40b  
GND  
144  
142  
140  
138  
136  
134  
132  
130  
128  
GND  
126  
124  
122  
120  
118  
116  
114  
112  
110  
GND  
108  
106  
104  
102  
100  
98  
10a  
11a  
12a  
13a  
14a  
15a  
16a  
17a  
18a  
19a  
20a  
21a  
22a  
23a  
24a  
25a  
26a  
27a  
28a  
29a  
30a  
31a  
32a  
33a  
34a  
35a  
36a  
37a  
38a  
39a  
40a  
36  
GND  
38  
40  
42  
44  
46  
48  
50  
52  
54  
GND  
56  
58  
60  
62  
64  
66  
68  
70  
72  
GND  
74  
76  
78  
80  
82  
84  
86  
88  
90  
10b  
11b  
12b  
13b  
14b  
15b  
16b  
17b  
18b  
19b  
20b  
21b  
22b  
23b  
24b  
25b  
26b  
27b  
28b  
29b  
30b  
31b  
32b  
33b  
34b  
35b  
36b  
37b  
38b  
39b  
40b  
GND  
37  
39  
41  
43  
45  
47  
49  
51  
53  
GND  
55  
57  
59  
61  
63  
65  
67  
69  
71  
GND  
73  
75  
77  
79  
81  
83  
85  
87  
89  
GND  
GND  
143  
141  
139  
137  
135  
133  
131  
129  
127  
GND  
125  
123  
121  
119  
117  
115  
113  
111  
109  
GND  
107  
105  
103  
101  
99  
97  
95  
93  
91  
96  
94  
92  
GND  
(NC: No connection)  
(4/4)  
 

Radio Shack Headphones 43 217 User Guide
Rio Audio MP3 Player Mp3 Player Model Chiba User Guide
Rotel Stereo Amplifier RA 980BX User Guide
RuggedCom Computer Hardware RP100 User Guide
Samsung Refrigerator DA99 01278C User Guide
Samsung Refrigerator RB1944SL User Guide
Sanyo Digital Camera VCC 3944 User Guide
Sanyo Vacuum Cleaner SC X2017 User Guide
Schwinn Exercise Bike 107P User Guide
Sennheiser Computer Hardware EK 500 User Guide