Salton Coffeemaker MECM1 User Guide

READ AND SAVE THESE INSTRUCTIONS  
WARNING: A risk of fire and electrical shock exists in all  
electrical appliances and may cause personal injury or death.  
Please follow all safety instructions.  
Hot Beverage Machine  
 
SAVE THESE INSTRUCTIONS  
THIS APPLIANCE IS FOR HOUSEHOLD USE ONLY  
CAUTION: A short power supply cord is provided to reduce the risk  
of personal injury resulting from becoming entangled in or tripping  
over a longer cord. Extension cords are available from local hardware  
stores and may be used if care is exercised in their use. If an  
extension cord is required, special care and caution is necessary. Also  
the cord must be: (1) marked with an electrical rating of 125 V, and at  
least 13 A, 1625 W, and (2) the cord must be arranged so that it will  
not drop over the countertop or tabletop where it can be pulled on by  
children or tripped over accidentally.  
POLARIZED PLUG: This appliance has a polarized plug, (one blade  
is wider than the other). As a safety feature to reduce the risk of  
electrical shock, this plug is intended to fit in a polarized outlet only  
one way. If the plug does not fit fully in the outlet, reverse the plug, If  
it still does not fit, contact a qualified electrician. Do not attempt to  
defeat this safety feature.  
ELECTRIC POWER: If the electric circuit is overloaded with other  
appliances, your appliance may not operate properly. It should be  
operated on a separate electric circuit from other operating  
appliances.  
3
 
FIGURE 1  
N
A
M
L
B
C
D
E
F
G
K
J
H
I
FIGURE 2  
A
B
C
D
E
F
G
H
I
J
K
L
Milk pitcher  
Drip grid with drip tray  
Base  
Features  
Figure 1  
Frothed milk spout  
Figure 2  
A
B
Water tank lid  
A
B
C
D
E
F
Froth regulator  
Suction piece  
Connector  
Carafe base  
On/off switch with LED  
light  
Thermal Carafe  
Swing-out filter  
Removable filter liner  
Button for opening the  
swing-out filter  
C
D
Water tank with cup  
markings  
Steam selector (“OFF”  
position)  
Milk discharge outlet  
Flexible hose  
Descaling hose  
M
N
E
F
Steam nozzle  
Feed pipe  
Product may vary slightly  
from illustrations.  
4
 
FIGURE 3  
FIGURE 4  
FIGURE 7  
FIGURE 10  
FIGURE 5  
FIGURE 8  
FIGURE 11  
FIGURE 6  
A
B
C
D
FIGURE 9  
FIGURE 12  
5
 
Congratulations on the purchase of your new Melitta® Choco Latte  
Hot Beverage machine. You have purchased an innovative and  
reliable appliance which we hope will give you years of enjoyment.  
As with every technical appliance, there are some fundamental  
aspects of this machine which should be observed. Please read  
the operating instructions carefully and keep them in a safe place.  
Above all, please pay attention to all safety instructions and  
warnings.  
Cord Compartment (Figure 3)  
Your machine has a cord storage compartment to hide excess  
cord and reduce countertop clutter.  
Before Initial Use  
Before you make coffee for the first time, you should perform the  
brewing procedure once or twice using the maximum quantity of  
water in order to clean your machine.  
Fill the fresh water tank with cold water to the upper level marking.  
Without using ground coffee or filter paper, switch the appliance on  
and let the water run through it into the thermal carafe. Discard  
water after it has run through the machine.  
Making Coffee  
1. Fill with water (Figure 4)  
Lift the lid above the water tank. Remove the water tank using  
the handle and fill it with cold tap water to the upper level marking.  
Never use hot water. Never fill the water tank with milk,  
prepared coffee, tea, etc.  
The cup markings are on the water tank (Figure 1/C). The  
markings refer to the quantity of fresh water. The actual yield  
amount of coffee will be less, because the ground coffee  
absorbs water.  
Replace the water tank and close the lid.  
Hint: To pre-warm the thermal carafe, rinse it out with hot water  
before making coffee. DO NOT fill the thermal carafe with cold  
water when it is still hot. All extreme temperature changes should  
be avoided.  
2. Insert filter paper (Figure 5)  
Press the button to open the swing-out filter (Figure 1/L). The  
filter automatically swings out to the right (Figure 5). Insert a  
Size 4 Melitta Cone paper filter into the filter holder. Fold the  
crimped edges over first.  
6
 
3. Fill with ground coffee (Figure 6).  
The amount of ground coffee to be used is a matter of taste. One  
measuring spoonful (approx. 6-7g/2 TBS) is recommended per cup  
for medium strength coffee. Swing back the filter until it clicks into  
position. Ensure that the filter liner is properly seated (Figure 7).  
4. Screw lid clockwise onto the thermal carafe and place on  
the carafe base.  
The lid must always be screwed onto the carafe because it  
activates the anti-drip valve (Figure 8). Although closed, coffee  
enters the carafe brew-through lid. It will remain hot and fresh  
for several hours.  
5. Switch on the appliance (Figure 9).  
Plug appliance into a 120V ~ 60 Hz outlet. Using the on/off  
switch (Figure 9/B), turn appliance on. The LED light (Figure  
9/A) lights up.  
6. Remove the thermal carafe.  
When the carafe has been removed, the anti-drip valve (Figure  
8) prevents surplus water from dripping on the carafe base.  
Therefore make sure that the filter liner (Figure 7) is properly  
seated.  
To pour coffee, open the lid of the carafe by turning in a  
counter-clockwise direction (or until the raised round mark is  
over the spout). After pouring, close the lid by turning it in a  
clockwise direction until it is tight. This will help keep the rest  
of the coffee hot.  
Unplug and allow to cool for 5 minutes between brewing  
cycles.  
IMPORTANT: If coffeemaker is not allowed to cool before  
immediate repeated use, water placed in water carafe may  
become overheated. A spray of steam could be released from  
openings, creating a risk of burns.  
Flavorings  
Try adding 1 teaspoon of your favorite flavoring, e.g. vanilla,  
hazelnut, or caramel to coffee before adding frothed milk. Adjust  
to taste.  
To froth or heat milk  
You can make cappuccino, café latte and hot chocolate, or even  
just heat milk using the frothed milk spout (Figure 2/A, B, C, D).  
7
 
Assemble the frothed milk spout as follows (Figure 10):  
1. Insert the froth regulator (Figure 2/A) into the suction piece  
(Figure 2/B) and press it on firmly until froth regulator sits  
directly on top of suction piece.  
2. Push the suction piece into the connector (Figure 2/C) and place  
the milk discharge outlet (Figure 2/D) onto the connector.  
3. Firmly attach the complete frothed milk spout to the steam  
nozzle (Figure 1/E) until the red seal of the steam nozzle is no  
longer visible.  
4. Leave the appliance switched on after the coffee has been  
made. (You will hear a gurgling sound when brewing is  
complete.)  
5. Wait until the temperature indicator (Figure 9/C) lights up,  
indicating that the steam temperature has been reached.  
Caution: During operation the temperature indicator (Figure 9/C)  
sometimes goes off. The required steam temperature is reached  
again within a short time by turning the Steam selector to the right  
(Figure 1D).  
6. Fill the pitcher (Figure 1/G) with cold milk.  
7. Replace the lid of the pitcher.  
8. Securely connect the pitcher to the frothing nozzle (Figure 11).  
You can also “vacuum” the milk directly out of a small milk  
container using the flexible hose (Figure 2/E).  
Important: The small milk container must not be allowed to exceed  
the height of the steam nozzle. The flexible hose must be inserted  
down into the container.  
Connect the flexible hose to the steam nozzle and insert the  
other end into the milk container (Figure 12).  
Place an empty cup underneath the frothed milk spout  
(Figure 12).  
9. Turn the Steam selector to the right (Figure 9/D). This  
“vacuums” the milk out of the milk pitcher or container. It is then  
mixed with steam in the frothed milk spout, and at the same  
time heated and frothed. The frothed milk flows through the  
milk discharge outlet into the cup. Return Steam selector to  
“OFF” position to stop milk flow.  
Important: You can incorporate more or less air into the milk by  
using the froth regulator (Figure 2/A). To do this, turn the knob  
slowly to the left or the right until you achieve the desired result.  
More air in the milk will result in thicker froth.  
8
 
10.After making the frothed milk, turn the steam selector to the off  
position.  
11. You can froth as much milk as often as you like provided that  
there is enough excess water in the water tank. If necessary,  
simply add more water.  
Caution: For frothing, do not fill the water tank above the top of  
the “well” at base of water tank, otherwise the water flows into the  
coffee brewing system.  
Experiment to determine your preferences: first coffee, then  
adding frothed milk, or first frothed milk then adding coffee.  
Making cocoa  
You can make hot chocolate by adding chocolate syrup to taste  
(approximately 2-3 tablespoons per cup) to some milk in the milk  
pitcher and stirring it. Proceed as if frothing milk. The mixture iwill  
become completely heated by the hot steam in the frothing  
nozzle. The mixture can also be frothed if desired (see section “to  
froth or heat milk”).  
Making Hot Tea  
Tea leaves may be placed in the filter if you wish to make hot tea  
instead of coffee. To brew 40 ounces of hot tea, use 312  
tablespoons of fresh tea leaves or empty five 334 ounce bags of  
tea into paper filter.  
To Heat Water  
1. Fill the pitcher with water.  
2. Connect the pitcher to the frothing nozzle.  
3. Proceed as if frothing milk.  
4. Switch off the appliance using the on/off switch.  
Descaling to prolong the life of your machine  
The service life of your hot beverage machine can be lengthened  
with regular descaling. We recommend descaling the appliance  
every three months. This will also result in better tasting coffee  
and other hot beverages.  
If you use a permanent filter, remove it from the swing filter before  
descaling.  
For descaling use a liquid, such as environmentally-friendly  
descaling agent available at retail outlets. Use it in accordance  
with the manufacturer’s instructions. Do not use a formic  
acid-based descaler.  
9
 
Descaling your machine  
Fill the water tank with water and then add the descaling agent in  
that order. Swing the swing-out filter back into the appliance. Place  
the carafe (with lid tightly screwed) onto the base (Figure 1/J).  
Please note that the lid serves to open the anti-drip valve, and is  
required to ensure that the water flows through correctly. Allow the  
descaling solution to take effect for about 15 minutes, then switch  
on the machine and allow the descaling solution to run through.  
Empty carafe. If necessary repeat the descaling procedure.  
Remove the steam nozzle by turning it counter-clockwise. Screw  
on the descaling hose (Figure 2/F) and place a cup underneath.  
Switch on the steam selector several times for one minute. Switch  
off the appliance. If necessary repeat the descaling procedure.  
Rinse out the water tank with clear water to remove any possible  
traces of descaling solution.  
Wait 5 minutes and then repeat the run-through process at least  
twice using clear water. Empty carafe after each run-through.  
Rinse the carafe, lid and filter liner thoroughly under running water.  
Repeatedly squeeze the anti-drip valve while rinsing.  
Switch on the steam selector and allow clear water to flow through  
the steam system again to clean it. Remove the descaling hose  
and replace the steam nozzle.  
Cleaning  
Unplug from outlet. Clean all parts that come into contact with milk  
(frothed milk spout, pitcher, including lid and feed pipe, flexible  
hose, drip tray and drip grid) in warm, sudsy water immediately  
after each use. Dry the parts. Do not clean them in a dishwasher  
as this could damage the seals.  
The filter liner can be removed for cleaning. Press button on top of  
machine (Figure 1N) and swing filter out to the right as far as it will  
go. The inner liner can then be removed (Figure 7). You should  
repeatedly press the anti-drip valve during cleaning, especially to  
remove all particles of coffee. Wipe the machine with a damp  
cloth, but never immerse in water! Wash out the carafe and lid  
with hot, sudsy water, using a brush if necessary. Rinse and dry it  
with a cloth. Do not clean it in a dishwasher.  
What to do if . . .  
only steam but no frothed milk is produced:  
-
-
Attach the pitcher or flexible hose correctly.  
Put the frothed milk spout together correctly and firmly.  
10  
 
-
Press the froth regulator firmly onto the suction piece and  
check the position of it (horizontal position for maximum  
amount of froth).  
-
-
Too little or no milk in the pitcher.  
The flexible hose in the milk carton does not reach far  
enough into the milk.  
-
Steam nozzle or frothed milk spout requires cleaning.  
the volume of milk froth is too low or frothing takes too long:  
-
-
-
-
Clean the frothed milk spout.  
Clean the steam nozzle.  
Descale the machine  
Use skim or 1% milk.  
no steam is produced:  
-
-
Refill the “well” in the water tank.  
Insert the water tank correctly.  
Spare parts / accessories  
Thermal Carafe  
If the glass in the thermal carafe breaks, you can purchase a new  
carafe without lid from the Consumer Relations Department by  
calling 1-800-947-3744.  
Any servicing requiring disassembly other than the above  
cleaning must be performed by authorized service center.  
11  
 
IMPORTANT NOTICE  
If any parts are missing or defective,  
DO NOT return this product.  
Please call our Customer Service Department for assistance.  
800-233-9054 Monday - Friday 9:00 am - 5:00 pm CST  
Thank You  
12  
 
LIMITED ONE YEAR WARRANTY  
Warranty: This Melitta product is warranted by Salton, Inc. to be free from defects in materials  
or workmanship for a period of (1) year from the original purchase date. This product warranty  
covers only the original consumer purchaser of the product.  
Warranty Coverage: This warranty is void if the product has been damaged by accident in  
shipment, unreasonable use, misuse, neglect, improper service, commercial use, repairs by  
unauthorized personnel, normal wear and tear, improper assembly, installation or maintenance  
abuse or other causes not arising out of defects in materials or workmanship. This warranty is  
effective only if the product is purchased and operated in the USA, and does not extend to any  
units which have been used in violation of written instructions furnished with the product or to  
units which have been altered or modified or to damage to products or parts thereof which have  
had the serial number removed, altered, defaced or rendered illegible.  
Implied Warranties: ANY IMPLIED WARRANTIES WHICH THE PURCHASER MAY HAVE  
ARE LIMITED IN DURATION TO ONE (1) YEAR FROM THE DATE OF PURCHASE. Some  
states do not allow limitations on how long an implied warranty lasts, so the above limitation  
may not apply to you.  
Warranty Performance: During the above one-year warranty period, a product with a  
defect will be either repaired or replaced with a reconditioned comparable model (at our  
option) when the product is returned to the Repair Center, or the purchase price refunded.  
The repaired or replacement product will be in warranty for the balance of the one-year  
warranty period and an additional one-month period. No charge will be made for such repair  
or replacement.  
Service and Repair: Should the appliance malfunction, you should first call toll-free  
1 (800) 233-9054 between the hours of 9:00 am and 5:00 pm Central Standard Time and  
ask for CONSUMER SERVICE stating that you are a consumer with a problem. Please refer  
to model number MECM1 when you call.  
In-Warranty Service (USA): For an appliance covered under the warranty period, no  
charge is made for service or postage. Call for return authorization (1 800 233-9054).  
Out-of Warranty Service: A flat rate charge by model is made for out-of-warranty service.  
Include $ 15.00 (U.S.) for return shipping and handling. We will notify you by mail of the amount  
of the charge for service and require you to pay in advance for the repair or replacement.  
For Products Purchased in the USA, but Used in Canada: You may return the product  
insured, packaged with sufficient protection, and postage and insurance prepaid to the USA  
address listed below. Please note that all customs duty / brokerage fees, if any, must be  
paid by you and we will require you to pay the cost of customs duty / brokerage fees to us  
in advance of our performing any service.  
13  
 
Risk During Shipment: We cannot assume responsibility for loss or damage during  
incoming shipment. For your protection, carefully package the product for shipment and  
insure it with the carrier. Be sure to enclose the following items with your appliance: any  
accessories related to your problem, your full return address and daytime phone number, a  
note describing the problem you experienced, a copy of your sales receipt or other proof of  
purchase to determine warranty status. C.O.D. shipments cannot be accepted.  
To return the appliance, ship to:  
To contact us, please write to,  
call, or email:  
Attn: Repair Center  
Salton, Inc.  
Salton, Inc.  
P.O. Box 6916  
708 South Missouri Street  
Macon, MO 63552  
Columbia, MO 65205-6916  
1(800) 233-9054  
Limitation of Remedies: No representative or person is authorized to assume for Salton,  
Inc. any other liability in connection with the sale of our products. There shall be no claims  
for defects or failure of performance or product failure under any theory of tort, contract or  
commercial law including, but not limited to negligence, gross negligence, strict liability,  
breach of warranty and breach of contract. Repair, replacement or refund shall be the sole  
remedy of the purchaser under this warranty, and in no event shall Salton be liable for  
any incidental or consequential damages, losses or expenses. Some states do not  
allow the exclusion or limitation of incidental or consequential damages, so the above  
limitation or exclusion may not apply to you.  
Legal Rights: This warranty gives you specific legal rights, and you may also have other  
rights which vary from state to state.  
For more information on Salton products:  
© 2001 Salton, Inc.  
All Rights Reserved  
P/N 60482  
Printed in China  
14  
 

Radica Games Games 784 User Guide
Raypak Swimming Pool Heater P R185B to R P405B, C R185B to C R405B, P R185BL to P R405BL, C R185BL to C R405BL User Guide
RCA DVD Player DRC628 User Guide
RCA Food Warmer SJT 400 User Guide
RCA Projection Television P52950 User Guide
Roadmaster Radio VRHDUA100 User Guide
Ryobi Cordless Saw RJ150V User Guide
Samsung Blood Pressure Monitor BF 180M User Guide
Samsung Home Theater System AH68 02293B User Guide
Sears Lawn Mower 91725597 User Guide